How To Remove Wall Speakers

If you have in-wall speakers that are difficult to accomplish, then this article is for y'all. Nosotros at Sound Communication have seen all sorts of in-wall speaker installations and we are here to help. Whether your speakers are installed backside a door, on an inside wall that's nigh an exterior wall, or anywhere else that'south difficult to become to, we tin can bear witness you how to get them out safely. The blog will assistance to empathize on how to remove in wall speakers.

Here are some tips and tricks on how to remove in-wall speakers that may be hard or impossible to reach.

Related Commodity: How to build speakers into wall

Get ready to remove the in-wall speakers

The commencement thing you'll need to do is go everything set up to remove the speakers. You volition want to have a drill, a drill bit that matches the spiral size on your speaker, and a flathead screwdriver.

How to Disassemble the Speaker

To remove the in-wall speakers, you lot'll need to first disassemble it. The offset step is to find the screws that are holding the speaker'southward circuit board in place. Once you've found them, unscrew them and set them aside. The next footstep is to utilise a flat-head screwdriver and pry open the seam of the speaker. You can then have out the excursion lath and set information technology aside with the screws. After that, you will take to cut away whatsoever wires still attached to the speaker past using wire cutters or a utility knife. Go on in mind that if you are cutting wires, you will have to make sure they don't tangle together over again when you're putting everything back together.

How to Remove the Speaker from the Wall

Beginning, remove the screws that attach the speaker to the wall. If you cannot notice any screws, use a drill with a Phillips-caput flake and slowly work your way through.

Afterward yous've removed all of the screws, pull out the wires gently. Information technology'south of import non to damage them so now would exist a skillful time to have some wire cutters on hand.

Once you've removed all of the wires, accept off whatsoever remaining attachments or brackets fastened to the wall.

Finally, pull out the speaker from behind the wall and throw it away!

Removing the Speaker from Your Wall

For each speaker, you volition need a set up of needle-nose pliers, as well as a Phillips screwdriver.

one. Remove the screws from the back of the speaker, which are holding it in place.

2. Apply your pliers to grip and twist the wires connecting the speakers to your receiver until they come gratis, then pull the speaker out of its slot with your hands or slide information technology out with a butter knife.

three. Accept off whatsoever other attachments from the dorsum of your speaker (such as brackets) and put them aside. You lot want to make sure that you don't lose them when yous take off the speaker itself.

4. Once all attachments are removed, gently pull on the plastic cover on both sides to remove information technology from effectually the front end of your speaker unit. It should come up off easily since there is no wiring attached to it.

How to Safely Reinstall the Speakers

Our kickoff step is to remove the slot covers. To do this, yous need to unscrew the screws that are on either side of the wall. Be conscientious not to impairment the cease of your walls by using a drill with a drill bit fabricated for soft wood. The next step is to remove the in-wall speakers from the slots. You may have to try multiple times earlier they come up out and should utilise a screwdriver or butter knife for leverage. Once y'all get them out, you can install them elsewhere or take them to be reused. Now, reinstall the slots with new screws and coverings! In that location you take it! With these simple steps, you can always have your in-wall speakers out when needed and put them support again without whatever worries.

Remove the speaker grille

The first step to removing your in-wall speakers it to remove the speaker grille. This way you lot can see where the speaker wire is coming from and have admission to the back of the wire. Remove the screws holding the grille in place and gently pull it off, trying not to yank on any wires.

Remove the speaker wire

The outset thing to practice is remove the speaker wires from the in-wall speakers. This can be done by using a wire cutter and following the wires from room to room. The wire will nearly probable be connected to an electrical outlet behind a wall or ceiling. If that'southward the example, disconnect it and cut it so you have enough wire length to work with.

Clean and touch on upward the wall

In order to remove in-wall speakers, it'south important that the surface of the wall is clean and gratuitous of old pigment. If you accept a textured surface on your wall, attempt to get rid of any bumps or texture so the wall surface is flat. Then use a putty knife or small scraper to get rid of any old paint that may be stuck to the walls.

Information technology'due south likewise of import not to touch on the speaker direct with your hands because it volition leave residue on the speaker which tin brand removal more than difficult. Make certain yous article of clothing gloves when treatment these speakers as well.

Supercede any cabling that you removed

If you lot're removing whatsoever sometime cabling, be certain to supercede it using the proper size cable and connectors. If you don't, you may have intermittent or no sound once you re-install your speakers.

Replace speaker grille and cover plate

The first affair you'll need is a screwdriver. Remove the speaker grille and embrace plate past unscrewing the screws on each side of the grille. Lift the grille off and set information technology bated, and so remove the screws holding the encompass plate in place. Once you take out all of these screws, the comprehend plate volition fall off of its own accord.

Now that your speaker grille and cover plate have been removed, you tin go ahead and remove your speaker from betwixt the walls.

If y'all demand to cutting wires in order to get at your speaker, exercise so with extreme caution or enquire a professional for help with this step. It's very important that yous don't damage any other office of your business firm as you're cutting these wires.

No matter what type of speakers are installed in your abode, this article will show yous how to safely remove them from where they're located. The tips and tricks mentioned higher up can help in-wall speakers that are near an exterior wall or those hard to attain due to interior obstructions or closets.

Put the speakers back in place

If your speakers are installed on the within of a wall, you may be able to put them dorsum in place. The speakers should be about 12 inches from the wall for ease of admission and to ensure that they sound as skillful as possible.

What to do if there is no style to reach the speakers

If you tin't find a mode to reach your in-wall speakers, then we recommend cut them. Of course, yous should call a professional if you're non sure how to do this and they will exist able to assist you lot.

FAQs

What if I accidentally remove the wrong speaker?

If you have a speaker that can be replaced, then it's an easy fix. Merely reinstall the speaker and you're all set. However, if the speaker is an in-wall recessed blueprint, so you'll demand to replace both speakers.

What if I can't discover my speakers?

This is the almost common issue we come across when people desire to remove their speakers. If your speakers are installed on a wall or ceiling, check with your installer to see if they left a document with all of the information you need to install or remove them. If non, then it's time to become creative.

How do I determine which side of the wall my speakers are on?

1 fashion is to use a stud finder and locate where the studs are in relation to where yous want your speakers aligned. And so, measure how far away they are from each other across the wall. Once y'all've found this measurement, measure from i side of your desired speaker location across the wall and write downwardly these measurements for both sides of the wall (one for each side). At present that you have these measurements, separate past ii and this volition give yous how far apart your speakers should be placed on either side of your desired location. Yous may at present decrease this number from your original measurement and this will give you how far abroad ane speaker should be from another on either side of their respective walls (one for each speaker).

Decision

Yous'll need a ladder, wire cutters, a drill, and a screwdriver for this chore.

Kickoff, remove the screws holding the grille in place. Pull the speaker wire out of the wall. You may need to cutting it with wire cutters at this point. Clean upwards the wall and touch upwardly whatsoever nail holes with a little spackle or paint. Replace whatever cabling that you removed, so put the speaker grille back on and replace the screws.

Put the speakers back in identify, and yous're finished!

Source: https://artisticamplification.com/how-to-remove-in-wall-speakers/